KNX Blinds Motor 220VAC

KNX Blinds Motor 220V AC controls the roller blind travel up/down, travel up/down to a specified percentage position by receiving a KNX signal.

Model: M/AG40B.1 Category:

Description

KNX Blinds Motor 220V AC controls the roller blind travel up/down, travel up/down to a specified percentage position by receiving a KNX signal.

Đặc trưng

  • Automatic travel measurement and supports limit point presetting
  • Enable to control the curtain travel up/down, stop and percentage up/down, and supports status response (travel up/down, stop, percentage up/down, etc.)
  • Enable short drag to start the motor
  • The rotate direction of the motor can be set to forward or reverse.
  • Preset position function, a total of 4 preset positions available
  • Safety control: Control the curtain position according to wind, rain, frost signal, and supports the power-on status recovery after power failure.
  • Auto control: Control the curtain position according to the weather status, heating, cooling signal
  • Scene control function
  • Forced position operation
  • Power-down save function
  • Overheat protection

Thông số

Basic Parameters

Working voltage: 21-30V DC
Working current: 6mA/30V DC
Communication: KNX
Rated input voltage: AC220-240V (50Hz)
Rated input current: 0.9A
Cable diameter of KNX terminal: 0.6-0.8mm
Motor rotate torque: 3N.m
Motor rotate speed: 22rpm

External Environment

Working temperature: -5℃~45℃
Working relative humidity: ≤90%
Storage temperature: -20℃~60℃
Storage relative humidity: ≤93%

Specifications

Dimensions: φ35×528(mm)
Net weight: 1224g (Motor) + 20g (Communication module）
Housing material: Steel (Motor) + retardant-frame PC (Communication module）
Installation: Wall hanging
Insulation rating: E
Work system: S2-3min
Protection rating (Compliant with EN 60529): IP44

Related products