KNX Curtain Motor with Adapter (220VAC)

KNX Curtain Motor 220V AC / KNX Curtain Motor with Adapter is a curtain controller controlled by a KNX panel or other KNX device. The motor can be widely used at home, office, hospital and hotel etc.

Model: M/S410.1 Category:

Description

KNX Curtain Motor 220V AC / KNX Curtain Motor with Adapter is a curtain controller controlled by a KNX panel or other KNX device. The motor can be widely used at home, office, hospital and hotel etc.

Đặc trưng

  • Automatic travel measurement and supports limit point presetting
  • Enable to open, close, stop and percentage open/close, and supports status response (open, close, stop, percentage open/close, etc.)
  • Enable short drag to start the motor
  • The rotate direction of the motor can be set to forward or reverse.
  • Preset position function, a total of 4 preset positions available
  • Safety control: Control the curtain position according to wind, rain, frost signal, and supports the power-on status recovery after power failure.
  • Auto control: Control the curtain position according to the weather status, heating, cooling signal
  • Scene control function
  • Forced position operation
  • Power-down save function

Thông số

Basic Parameters

Working voltage 21-30V DC
Working current 6mA/30V DC
Rated input voltage
KNX Curtain Motor 220V AC
AC100-240V (50/60Hz)
KNX Curtain Motor with Adapter
24V DC
Rated input current
KNX Curtain Motor 220V AC: 0.4A
KNX Curtain Motor with Adapter: 1.5A
Communication KNX
Cable diameter of KNX terminal 0.6-0.8mm
Motor rotate torque 1.2N.m
Motor rotate speed 95rpm

External Environment

Working temperature -5℃~45℃
Working relative humidity ≤90%
Storage temperature -20℃~60℃
Storage relative humidity ≤93%

Specifications

Dimensions 283×71×50.6(mm)
Net weight
KNX Curtain Motor 220V AC: 976g
KNX Curtain Motor with Adapter: 874g
Housing material PC, aluminum
Installation Wall hanging
Protection rating (Compliant with EN 60529) IP41

Related products